Classic 1 Pair Install Series


Classic UP SPOFC 1 pair installation cable


Van Damme classic 1 pair is the ideal cable for both intricate rack wiring and installation. The cable is flexible, tough and easy to prepare and use. The foil screen is bonded to the outer jacket for ease of stripping and the tinned UPOFC drain wire remains in close contact to the foil to ensure excellent screening. The range is available on ten colours for ease of identification by application on both 100m and 500m reels.

Materials
This cable now uses a mixture of Ultra Pure Silver Plated Oxygen Free Copper and Ultra Pure Oxygen Free Copper for its conductors. As with the ultra pure oxygen free copper used in other Van Damme Cables ‘solderability’ and conductivity are much improved. The additional advantage of UPSPOFC is that silver is approximately 5% less resistive than copper. High frequencies, which gravitate to the outside of the conductor due to the skin effect, are conducted slightly more efficiently than the lower frequencies which tend to saturate the UPOFC conductor. In addition silver is less susceptible to corrosion than copper and so the plating offers a protective barrier between the conductor and the insulation or free air.

Cross-linked polyethylene (XLPE) is used for the conductor insulation. Although considerably more expensive than conventional polyethylene it offers distinct advantages over other insulation materials. XLPE has a low dielectric constant (2.2 at 1KHz), essential for minimising high frequency signal losses, and is stable at high temperatures. This temperature stability ensures that the insulation material resists shrink back during the soldering process. It has good abrasion and stress-cracking resistance yet remains flexible down to –40 degrees C. XLPE also is less environmentally damaging than other insulation materials as it releases carbon dioxide and water during combustion with no halogen emission.

The paired conductors are twisted together with a 24AWG UPOFC drain wire and shielded with aluminium/polyester foil tape which is bonded to the PVC/neoprene composite outer sheath. This material remains flexible even at sub zero temperatures.

Applications
• Permanent installations of analogue balanced audio circuits
• Internal rack and patch panel wiring looms
• Short adaptors and multipin breakouts

Mechanical pair specifications
Conductor Material Bare silver plated ultra pure oxygen free copper wire
  Stranding  1 x 0.20mm
  Material Bare ultra pure oxygen free copper wire
  Stranding 6 x 0.20mm AWG 24/7 combined
Insulation Material Cross linked polyethylene (XLPE)
  Diameter 1.20mm ± 0.10
Screen Type Aluminium polyester foil
  Drain wire 7 x 0.20mm tinned oxygen free copper wire
  Diameter 2.46mm
Electrical pair specifications
Description Unit of measurement Actual result
Resistance Ohm/km  
Conductor   80.2
Shield   80
Insulation Mohm/km <2600
Capacitance pF/m  
Core to core   65.5
Core to shield   124.6
     
Test voltage Volt 1000v no cracks
 
Overall jacket properties
Jacket Material Flexible PVC composite
  Overall diameter 3.50 mm
  Bend radius 15 x overall diameter
  Tensile strength 0.85Kg/mm2
  Elongation >250%
  Heat shock 120 °Cx h no cracks
  Temp Range -10 to +60 degrees C
Cable Weight kg/km 17kg
 
Stock code, weights and dimensions
Stock code Description RAL number
268-001-000 Van Damme classic 1 pair, Black 9005
268-002-060 Van Damme classic 1 pair, Blue 5002
268-003-020 Van Damme classic 1 pair, Red 3001
268-014-050 Van Damme classic 1 pair, Green 6001
268-015-070 Van Damme classic 1 pair, Violet 4008
268-017-030 Van Damme classic 1 pair, Orange 2007
268-064-090 Van Damme classic 1 pair, White 9010
268-066-080 Van Damme classic 1 pair, Grey 7031
268-068-040 Van Damme classic 1 pair, Yellow 1021
268-070-010 Van Damme classic 1 pair, Brown 8012